WR-06 Medium Power Termination
The WR-06 Medium Power Termination is a precision-engineered waveguide component that absorbs moderate RF energy, providing a perfect 50-ohm (normalized) match to prevent reflections. It is specifically designed for the 110 - 170 GHz frequency range, serving as a critical building block in D-Band infrastructure.
Medium-power terminations utilize a precision-tapered lossy dielectric wedge that gradually absorbs the RF wave over several wavelengths, preventing any sudden impedance steps. Moving into the D-Band (110-170 GHz), WR-06 components are at the frontier of next-generation 6G backhaul research, requiring microscopic precision in their 0.065" x 0.0325" apertures.
Key Features
Broadband Coverage
Full-band performance across the complete operating frequency range with consistent impedance matching.
Moderate Power Handling
Enhanced absorptive element with improved thermal capacity for sustained operation under moderate power conditions.
Production Ready
Built for reliability in automated production test lines and system integration environments.
Field Deployable
Compact enough for field applications while exceeding the power handling capability of low power loads.
D-Band Use Cases
6G Research
Sub-THz communication links
Spectroscopy
Chemical signature detection
Radio Astronomy
High-frequency receivers
Wafer Probing
On-chip mmWave testing
More Medium Power Terminations
Frequently Asked Questions
How is VSWR minimized in a termination?+
The absorbing element is machined into a sharp spear or wedge shape. When the RF wave hits the tip, it sees almost empty space. As it travels deeper, the wedge gets thicker, gradually absorbing the power so no distinct "wall" ever bounces the signal back.
Why is WR-06 important for 6G?+
As 5G maxes out the Ka-band, engineers are looking to the D-Band (110-170 GHz) for 6G telecom networks capable of 100+ Gbps. WR-06 components are currently the standard for prototyping and testing these futuristic sub-THz network architectures.
What is the tolerance requirement for WR-06?+
At 170 GHz, the wavelength is 1.76 millimeters. The physical machining tolerances for WR-06 must be held to within +/- 0.0005 inches (12 microns) to prevent severe phase distortion and return loss.