WR-03 Waveguide Tee
The WR-03 Waveguide Tee is a precision-engineered waveguide component that splits a single millimeter-wave signal into two paths, or combines two signals together. It is specifically designed for the 220 - 330 GHz frequency range, serving as a critical building block in J-Band infrastructure.
Available in E-plane (series) or H-plane (shunt) configurations, the Tee creates a precision 3-port junction. Due to the physics of the junction, a perfect match at all three ports requires an internal matching post. Operating in the extreme J-Band (220-330 GHz), WR-03 is the absolute cutting edge of commercial waveguide technology. The 0.034" x 0.017" aperture is thinner than a credit card, requiring flawless electroforming.
Key Features
Dual Configuration
Available in E-plane (series) and H-plane (shunt) configurations to meet different signal phase and power division requirements.
Precision Port Alignment
CNC-machined port interfaces with tight tolerances ensure accurate waveguide alignment and repeatable flange mating on all three ports.
Low Junction Loss
Optimized tee geometry minimizes mismatch loss at the three-port intersection, maintaining signal integrity across the full operating bandwidth.
Gold-Plated Construction
OFHC copper body with gold plating provides excellent conductivity, corrosion resistance, and consistent long-term electrical performance.
J-Band Use Cases
ALMA Telescope
Sub-millimeter astronomy
THz Spectroscopy
Molecular rotational sensing
Material Science
Dielectric characterization
Medical Imaging
Non-ionizing THz scanners
More Waveguide Tees
Frequently Asked Questions
What is a Magic Tee?+
A Magic Tee is a specialized 4-port component that combines an E-plane Tee and an H-plane Tee into a single unit. It acts as a 180-degree hybrid coupler, perfectly isolating the E and H ports from each other.
What is the physical size of the WR-03 opening?+
The internal hole of a WR-03 waveguide is 0.034 inches by 0.017 inches (0.86 mm by 0.43 mm). It is so small that a standard mechanical pencil lead cannot fit inside it. Dust particles alone can severely ruin the VSWR.
Why is gold plating mandatory on WR-03?+
At 300 GHz, the skin depth of the RF signal is less than 0.1 micrometers. The signal travels exclusively on the very outer layer of atoms on the waveguide wall. Even a microscopic layer of copper oxidation will completely absorb the terahertz wave, making non-oxidizing gold plating absolutely mandatory.